Industry news · Utilities ·
Draft update to the street works Red Book out for consultation
The Department for Transport has published a redraft of the 2013 code on signing, lighting and guarding street and road works. It covers all four UK nations, and responses close on 14 December 2026.
14 Dec Consultation on the draft street works safety code closes, 14 December 2026
On 21 September 2026 the Department for Transport opened a consultation on a redrafted Safety at Street Works and Road Works: A Code of Practice, known in the industry as the Red Book. The code is the statutory guidance on signing, lighting and guarding works on public roads, and it was last updated in 2013. The draft has been prepared jointly with Transport Scotland, the Welsh Government and the Department for Infrastructure in Northern Ireland, and would apply in all four UK nations to highway and road authorities, utilities and their contractors, and holders of street works licences. Motorways and dual carriageways with a speed limit of 50 mph or more stay outside it.
The main proposals concern pedestrians and short jobs. The draft sets 1.5 metres as the preferred footway width past works and 1.2 metres for walkways and quiet footways, but a 1 metre pinch point could run for no more than 6 metres. It adds definitions of “hard” and “soft” road closures, asks for cyclists to be kept on their usual route wherever possible, and sets clearer ramp gradients for disabled people. Short duration works, such as pole testing, leak detection, fault finding and sewer jetting, get separate layouts for stops under 15 minutes and stops of 15 to 60 minutes. A temporary road obstruction sign could be reused once queues have cleared, instead of after a fixed hour.
Nothing has changed yet. The 2013 code still applies, the draft leaves its own start date blank, and the consultation asks whether a 6 month lead-in would be long enough. Highways Magazine reports that the Highway Authorities and Utilities Committee’s safety working group helped shape the draft and recommended some of the changes.
“Failure to comply with this Code is evidence of failing to fulfil your legal obligations to sign, light and guard works.”
What it means for utility contractors
- Respond by 14 December: the consultation asks directly about mobile and short duration works, the 6 metre limit and the lead-in period, and invites utilities and contractors to answer.
- Keep working to the 2013 code: until the new one is published and comes into force. Supervisors and operatives will need briefing on the new layouts and diagrams before then.
- Look at footway layouts: jobs that now leave a long 1 metre footway past the works may need a temporary walkway or a different layout under the draft.
- Republic of Ireland: the code does not apply there, so crews working south of the border are not affected by this change.
Sources
- GOV.UK: Updating the safety at street works and road works code of practice (21 September 2026)
- GOV.UK: Safety at street works and road works, draft code of practice (PDF)
- Department for Infrastructure: Updating the Safety at Street Works and Road Works Code of Practice
- Highways Magazine: DfT launches consultation on draft roadworks code of practice (24 September 2026)
- HighwaysIndustry.com: The street works rulebook is under review (24 September 2026)